Philips B2G81U

Philips B2G81U

   

AnThis small a.c/d.c mains valve radio was made in 1959, and was one of many radios to have p.c.b mounted technology. It has medium & long wave band coverage.
The valves used in this receiver were:-
UCH81, UBF89, UCL82, UY85
The cabinet front had been chipped on its paintwork, so I took the liberty to re-spray it in white.
It required extensive replacement of resistors and capacitors, modifying the connections between the volume control and the p.c.b, and adding negative feedback to improve sound quality.
The circular dial cover can be a problem on these radios, as there is a small piece of metal that locks it in to place in the cabinet ( i.e ,a groove on the internal part of the cover). It has to be in a correct position to lock this, otherwise the cover falls off.
It is still an impressive looking small radio, and it makes a good comparison to the Stella ST110U ( I used the Philips manual to repair the Stella, so the layout is practically the same for both radios
)